i-Vac S40 - Troubleshooting; Problems and Solutions

15
Troubleshooting
Spare Parts & Troubleshooting
Fault Cause Solution
Cleaner doesn’t start Flat battery Charge the vacuum cleaner
Reduced suction
The dust bin is full of dust Empty the dust bin
Filter is blocked Cleanorreplacethelter
The airway is blocked Clear the airway
The charging indicator light
fails to turn blue during
charging (led 1 to 3 ashes
blue indicates the status of
charging)
The charger is not fully
inserted into the cleaner
Reinsert the charger into the
cleaner, ensuring it is securely
in place
The charger is not connected
to the mains power
Connect the charger to the
mains power
Insufcient application
time after charging
Insufcientchargingtime
Fully charge the battery
according to the instructions
described in the charging
section
Normal discharge reduction
in battery
Purchase a new battery
Light ashes from red to
blue intermittently.
Battery is not inserted into
the cleaner properly
Remove the battery and
reinsert it into the cleaner
until you hear it click into
place
Problems and solutions
If you come across a problem, please use the checklist of troubleshooting tips before contacting
Godfreys Customer Care.