Appendix
Delivery set
1. I•WARM 710 Thermostat
2. Floor mounted temperature sensor with connection cable
(2 m long).
3. External terminal block for grounding line connection
4. User and installation manual
5. Packing box
I•WARM 710 Installation manual
Important: Switch off power before connecting or disconnect-
ing wiring to the thermostat. A qualified electrician trained
to current Indoor Electrical Equipment regulations must install
all wiring. Failure to do so may invalidate the warranty.
We strongly recommend that you NOT install the thermostat
in premises with high air humidity. It is prohibited to install
the device in bathrooms, saunas, shower cubicles or pools.
The thermostat controlling heating in these premises must
16
To Next Page
Loading...