Basic functions
The I•WARM 710 thermostat is designed for electrical
underfloor heating systems (heating mats or sections).
The device automatically keeps the temperature you have
set based on data received from the floor mounted tempera-
ture sensors (included in the delivery set). Both real floor
temperature and the desired value you have preset are dis-
played. Or, at your command, air temperature in the room can
be displayed, measured by the device’s built-in sensor.
Continuous selfdiagnostics are provided, with warning mes-
sages being displayed.
The manual heating control mode can be activated in case
of sensor malfunction, when heating must continue until
the problem is solved.
Startup of heating system control
The thermostat can be turned on after wiring is finished
and all connections are tested.
4
To Next Page
Loading...