CONTROLLER MANUAL
1-6
CONTROLLER MANUAL – SFC/SFB SERIES BOILERS
“P” to the right of the panel indicates that the changes have been saved.
To exit without saving the changes, touch the On/Off area above the Dot.
ADJUSTING THE DHW TEMPERATURE
To adjust the DHW temperature:
1. From the Main menu, touch the Faucet button.
The DHW menu is displayed. In this menu, the DHW target temperature appears
on the main display.
2. To change the DHW target temperature, touch the Plus or Minus buttons.
3. To save the changes, touch the Return button. To exit without saving the
changes, touch the On/Off button.
NOTE
The boiler is equipped with
a Frost Protection feature.
This feature will operate the
boiler pump and the burner
to help protect the boiler
from freezing. If the boiler is
in a hard lock-out condition
the burner will not operate,
however the boiler heater
pump will operate. IBC is
not responsible for damages
to the boiler, and/or related
components, nor property
damages that may result from
freezing conditions.
To Next Page
Loading...
Need help?
General
