EasyManua.ls Logo

IBC SL 30-199 G3 - User Manual

Default Icon
124 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
INSTALLATION &
OPERATING MANUAL
Residential Condensing Boiler
SL 10-85 G3
SL 14-115 G3
SL 20-160 G3
SL 30-199 G3
WARNING
If the information in this manual is not followed exactly, a fire or explosion may result causing
property damage, personal injury, or loss of life.
Do not store or use gasoline or other flammable vapors and liquids or other combustible materials in
the vicinity of this or any other appliance.
If you smell gas:
Do not try to light any appliance.
Do not touch any electrical switch; do not use any phone in your building.
Immediately call your gas supplier from a nearby phone. Follow the gas supplier’s instructions.
If you cannot reach your gas supplier, call the fire department. Installation and service must be
performed by a qualified installer, service agency or the gas supplier.

Table of Contents

Other manuals for IBC SL 30-199 G3

Question and Answer IconNeed help?

Do you have a question about the IBC SL 30-199 G3 and is the answer not in the manual?

IBC SL 30-199 G3 Specifications

General IconGeneral
TypeCondensing Boiler
Fuel TypeNatural Gas / Propane
AFUE95%
Water Connection Size1" NPT
Gas Connection Size3/4" NPT
Vent Connection Size3"

Summary

Safety Information

Manual Safety Markings

Defines different safety symbols like Danger, Warning, and Caution used in the manual.

Important Safety Instructions

Highlights critical safety advice for installation, start-up, and servicing by qualified technicians.

Specifications

Boiler Specifications

Details technical specifications like input, output, AFUE, pressures, and temperatures for different models.

Connection Specifications

Outlines required connection types and sizes for flue, air, water, and gas for different boiler models.

Before Installation

Installation

Code Requirements

Specifies compliance requirements with national and local codes for installation.

Exhaust Venting and Air Intake

Covers planning for vent materials, travel, and termination for combustion air.

Installing the Condensate Trap

Water Piping

Water Quality Warning

Highlights the importance of water quality for heat exchanger longevity and performance.

Gas Piping

Gas Pressure

Details minimum and maximum gas supply pressure requirements and pipe length guidelines.

Electrical Connections

About the Boiler Controller

Before Operating the Boiler

Important Pre-Ignition Checks

Lists essential checks for electrical, ducting, and water connections before operation.

Boiler Operation

Commissioning

Covers boiler calibration, fuel source checks, fuel conversion, and gas valve adjustments.

Service and Maintenance

Replacing Components (Fan, Gas Valve, Burner)

Documents procedures for replacing key components like the fan, gas valve, and burner.

Cleaning the Condensate Trap

Troubleshooting

Electronic Components

Details troubleshooting for non-standard electronic components like sensors and modules.

Troubleshooting Error Messages

Explains common errors displayed on the controller, their diagnoses, and fixes.

Related product manuals