IBC SL 14-115 G3 User Manual

INSTALLATION &
OPERATING MANUAL
Residential Condensing Boiler
SL 10-85 G3
SL 14-115 G3
SL 20-160 G3
SL 30-199 G3
WARNING
If the information in this manual is not followed exactly, a fire or explosion may result causing
property damage, personal injury, or loss of life.
Do not store or use gasoline or other flammable vapors and liquids or other combustible materials in
the vicinity of this or any other appliance.
If you smell gas:
Do not try to light any appliance.
Do not touch any electrical switch; do not use any phone in your building.
Immediately call your gas supplier from a nearby phone. Follow the gas supplier’s instructions.
If you cannot reach your gas supplier, call the fire department. Installation and service must be
performed by a qualified installer, service agency or the gas supplier.

IBC SL 14-115 G3 Specifications

General

Brand	IBC
Model	SL 14-115 G3
Category	Boiler
Language	English

Summary

Safety Information

Manual Safety Markings

Describes safety symbols: Danger, Warning, Caution, Note.

Important Safety Instructions

General safety guidelines for installation and operation.

Pre-Installation Precautions

Checklist of precautions before starting installation.

Specifications

Boiler Specification Details

Technical data including input, output, efficiency, pressure, temperature limits.

Cabinet Dimensions

Visual representations of boiler dimensions for different models.

Connection Specifications

Details required pipe sizes and types for connections.

Installation Procedures

Code Requirements Compliance

Compliance with Canadian and US installation codes.

Installation Location and Clearances

Guidelines for boiler placement and required clearances.

Venting and Air Intake Systems

Procedures for exhaust venting and combustion air intake.

Condensate Management

Installing condensate trap and neutralizer.

Water Piping Requirements

Best practices, system design, and fluid requirements.

Gas Piping Requirements

Requirements for gas supply pressure and pipe sizing.

Electrical Connections Guide

Wiring for power, pumps, controls, and sensors.

Boiler Controller Operations

Controller Overview and Features

Features and capabilities of the touchscreen controller.

Control Interface Description

Description of the touchscreen display and its functions.

Before Operating the Boiler

Important Pre-Ignition Checks

Checklist for verifying installation before initial operation.

Boiler Operation Procedures

Lighting and Shutting Down

Procedures for boiler start-up and shutdown.

Commissioning and Adjustments

Steps for testing, calibration, and tuning.

Service and Maintenance

Homeowner Maintenance Checklist

Routine checks for the owner.

Contractor Maintenance Tasks

Tasks for qualified service technicians.

Component-Specific Maintenance

Detailed maintenance for various parts like traps, burners, etc.

Component Replacement Procedures

Steps for replacing fan, gas valve, and burner.

Troubleshooting Guide

Preliminary Diagnostic Checks

Basic steps to diagnose issues.

Electronic Component Diagnosis

Troubleshooting electronic parts like sensors and modules.

Error Messages and Resolution

Interpreting controller errors and applying fixes.

Common Problem Scenarios

Detailed fixes for ignition, temperature, and cycling issues.

Appendices

Wiring Diagrams

Electrical schematics for the boiler controller.

Sequence of Operation

Step-by-step process of boiler cycles.

Boiler Parts Diagrams

Exploded views of boiler components.

Installation & Commissioning Report

Installation and Commissioning Report

A form to document installation and setup.

Important US User Note

Energy Saving Feature Override

Important conditions for using an override feature.