EasyManua.ls Logo

iBeam TE-BPLTC User Manual

iBeam TE-BPLTC
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
TE-BPLTC
Product Manual
TE-BPLTC
Product Manual
800.221.0932
iBeamUSA.com
460 Walker Street, Holly Hill, FL 32117
800.221.0932
iBeamUSA.com
460 Walker Street, Holly Hill, FL 32117
Version 1.0
IMPORTANT
If you are having difficulties with the installation
of this product, please call our Tech Support line
at 1-800-253-TECH. Before doing so, look over
the instructions a second time, and make sure
the installation was performed exactly as the
instructions are stated. Please have the vehicle
apart and ready to perform troubleshooting
steps before calling.
KNOWLEDGE IS POWER
Enhance your installation and fabrication skills by
enrolling in the most recognized and respected
mobile electronics school in our industry.
Log onto www.installerinstitute.com or call
800-354-6782 for more information and take steps
toward a better tomorrow.
Metra recommends MECP
certified technicians
Version 1.0
IMPORTANT
If you are having difficulties with the installation
of this product, please call our Tech Support line
at 1-800-253-TECH. Before doing so, look over
the instructions a second time, and make sure
the installation was performed exactly as the
instructions are stated. Please have the vehicle
apart and ready to perform troubleshooting
steps before calling.
KNOWLEDGE IS POWER
Enhance your installation and fabrication skills by
enrolling in the most recognized and respected
mobile electronics school in our industry.
Log onto www.installerinstitute.com or call
800-354-6782 for more information and take steps
toward a better tomorrow.
Metra recommends MECP
certified technicians
Question and Answer IconNeed help?

Do you have a question about the iBeam TE-BPLTC and is the answer not in the manual?

iBeam TE-BPLTC Specifications

General IconGeneral
BrandiBeam
ModelTE-BPLTC
CategoryAutomobile Accessories
LanguageEnglish

Summary

Important Installation and Support Information

Technical Support Guidelines

Contact support for installation issues after re-checking instructions and preparing the vehicle.

Mobile Electronics Certification Program

Enhance skills via Installer Institute. Recommends MECP certified technicians.

Product Specifications

Sensor Specifications

Details sensor type, pixel resolution, video signal, and dynamic guidance trajectory.

Camera Performance Metrics

Covers AGC, BLC, resolution, S/N ratio, current consumption, and power supply.

Environmental and Operational Limits

Specifies operating/storage temps, view angle, water-proof rating, and minimum illumination.

Camera Connection Guide

Mounting and Wiring Instructions

Install camera, connect RED wire to +12V reverse, BLACK to ground.

Video Signal Connection

Run video cable to display, connect YELLOW RCA to reverse camera input.

Optimal Camera Angling

Camera requires a 30-40 degree downward angle for proper functionality.

Related product manuals