IBERITAL DE RECAMBIOS, S.A.
Page 10 of 22 manual electr.ce ingles 22-11-2004.doc
In the selections already adjusted, when you are programming any other selections, the LEDs
are gone out. At any time, you can adjust another time one selection already adjusted.
If during the adjustment of a dosing any of the LEDs are winking, the adjustment will not be
memorized. Please check the volumetric counter, in case there would be any dust from the
water supply.
III. ADJUSTMENT OF THE HOT WATER MIXTURE AND
DOSING
1- Press the continuous button during 5 seconds and the LEDs will turn on in the five
erogation selections.
To Next Page
Loading...
Need help?
General
