IBERITAL DE RECAMBIOS, S.A.
Page 11 of 22 manual electr.ce ingles 22-11-2004.doc
2- Press the hot water switch .
3- Press another time the hot water button
4- Press the continuous button
IV. ADJUSTMENT OF THE ELECTRONIC PRE-INFUSION
The pre-infusion can be enable and disable, as follows:
To enable this function:
1) Turn Off (position 0) the On-Off switch
2) Press the 1 short coffee button and at the same time turn On the On-Off switch (to
position 1 or 2).
3) The 1 short coffee LED will light
4) Stop pressing the 1 short coffee button
5) Turn Off (position 0) the On-Off switch
6) Finally, turn On the On-Off switch to the position 2 (normal working).
To disable this function:
1) Turn Off (position 0) the On-Off switch
2) Press the 1 long coffee button and at the same time turn On the On-Off switch (to
position 1 or 2)
3) The 1 long coffee LED will light
4) Stop pressing the 1 long coffee button
5) Turn Off (position 0) the On-Off switch
6) Finally, turn On the On-Off switch to the position 2 (normal working)
To Next Page
Loading...
