IBERITAL DE RECAMBIOS, S.A.
Page 13 of 22 manual electr.ce ingles 22-11-2004.doc
Important: when you are doing the water fill up of the boiler process for the first time and this
alarm appears. Then, turn the On-Off switch Off (position 0) and following turn the On-Off
switch On (position 1) another time. (The fill up process takes more than 1 minute).
• Failure in the volumetric counter (5 seconds)
The LED of the erogation being used (1 short coffee, 2 long coffee ...) is winking due to some
failure in the volumetric counter. At the same time, this erogation does not stop.
• Failure in the volumetric counter (erogation)
This alarm appears when the erogation time is too long. At the same time, this problem
appears when the coffee is ground too fine or too many grams.
VIII. 3
RD
RELAY SOFTWARE PROGRAM.
Programming the 3rd relay as automatic water outlet
Auto water outlet (hot and cold):
Please contact the manufacturer of the machine to do this option.
To Next Page
Loading...
