EasyManua.ls Logo

ibico ibiMaster 115 User Manual

ibico ibiMaster 115
54 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
CZ
RUS
Instruction Manual
Manuel d’utilisation
Bedienungsanleitung
Manuale d’istruzioni
Gebruiksaanwijzing
Manual de instrucciones
Manual de Instruções
Bruksanvisning
Instrukcja obsługi
Návod k obsluze
Használati útmutató
Руководство по
ксплуaтaции
ibiMaster 115/115e
Question and Answer IconNeed help?

Do you have a question about the ibico ibiMaster 115 and is the answer not in the manual?

ibico ibiMaster 115 Specifications

General IconGeneral
Brandibico
ModelibiMaster 115
CategoryBinding Machine
LanguageEnglish

Summary

Specifications

Safety Instructions

General Safety Alert Symbol

Explains the safety alert symbol and its significance for potential hazards and damage.

Cleaning Procedures

Caution: Unplug before cleaning. Wipe exterior only with a damp cloth. Do not use solvents.

Service and Repair Guidelines

Do not attempt self-service. Contact authorized representative for repairs.

Important Safeguards

General Safeguards

Use for intended purpose, avoid blocking openings, place on stable surface, lift from bottom.

Electrical Safeguards

Connect to correct voltage, ensure accessible receptacle, unplug when not in use, avoid damaged cords.

Warranty Information

Instructions for use: ibiMaster 115

Determine Sheet Width

Rotate the edge guide to select the correct paper or cover size for binding.

Punching Paper

Jog sheets, insert into punch throat, and pull handle down. Punches up to 15 sheets (80gsm).

Determine Plastic Comb Size

Align document against comb support and read scale to find required comb binding element size.

Binding Process

Place document on opened comb element, rotate lever to close element, and lift book upward.

Empty Chip Drawer

Gently pull drawer on right side to remove, empty, and re-insert when full of paper chips.

Instructions for use: ibiMaster 115e

Getting Started

Plug the power cord into an appropriate power receptacle to begin.

Determine Sheet Width

Rotate the edge guide to select the correct paper or cover size for binding.

Punching Paper

Turn on machine, jog sheets, insert into punch throat, and press punch button. Watch for jam lights.

Determine Plastic Comb Size

Align document against comb support and read scale to find required comb binding element size.

Binding Process

Place document on opened comb element, rotate lever to close element, and lift book upward.

Empty Chip Drawer

Gently pull drawer on right side to remove, empty, and re-insert when full of paper chips. Red light indicates full.

Related product manuals