ibis Mojo Sl-R User Manual

38
match them. It looks like they might
fit but they are not interchangeable.
Removal and installation procedures
are identical. Please refer to the sec-
tion on Mojo SL and Mojo Carbon
link maintenance in this manual (PP
50–51).
Bearing Replacement:
If you’re handy with a bench vice and
have a good supply of sockets, you
can attempt the replacement of the
bearings in the Lopes Link and lower
link yourself. While we don’t have
step–by–step instructions, you are
welcome to purchase the bearings
and try it yourself. New links with
bearings installed are available in
the Ibis webstore as well. The current
version of the Mojo SL lower link has
been extensively redesigned and
provides a 100% increase in torsional
stiffness along with a 7.5% increase
in lateral stiffness. You may want to
consider this upgrade rather than
replacing your bearings.
Mojo Bearing Specs:
Mojo, Mojo SL, SL-R, , HD, HDR
Upper Link
• 608 2RS 8 ID x 22 OD x 7 W
(Enduro P/N 608 2RS MAX)
Mojo, Mojo SL, SL-R Lower Link
• Front: 15 ID x 28 OD x 7 W
(Enduro P/N 6902 2RS)
• Rear: 10 ID x 22 OD x 6 W
(Enduro P/N 6900 2RS)
Mojo HD and HDR Lower Link
• Front: 15 ID x 26 OD x 10 W Dual
Row Angular Contact
(Enduro DR 1526 RS)
• Rear: 15 ID x 28 OD x 7 W
(Enduro P/N 6902 2RS)
You can find bearings used on the
Mojo here:
http://tinyurl.com/p5sgyuf
on the Enduro website. Here’s the direct
link to the Ibis Mojo/SL bearing kit:
http://tinyurl.com/k5klejl
The kit includes bearings for the upper
and lower links.
Maintenance

ibis Mojo Sl-R Specifications

General

Brand	ibis
Model	Mojo Sl-R
Category	Bicycle
Language	English