Need help?Do you have a question about the ibis HAKKA MX and is the answer not in the manual?
General| Frame Material | Carbon Fiber |
|---|---|
| Wheel Size | 700c |
| Brake Type | Disc |
| Max Chainring Size | 50t |
| Seatpost Diameter | 27.2mm |
| Drivetrain | 1x or 2x |
| Tire Clearance | 700c x 40mm |
| Fork | Enve Cross Disc Fork |
Geometry and specifications for the Ibis Ripmo model.
Geometry and specifications for the Ibis Ripmo AF model.
Geometry and specifications for the Ibis Ripley model.
Geometry and specifications for the Ibis Mojo model.
Geometry and specifications for the Ibis Mojo HD5 model.
Geometry and specifications for the Ibis Hakka MX model.
Sizing recommendations for Ibis mountain bikes based on rider height.
Sizing recommendations for the Ibis Hakka MX based on rider height.
Guide for routing cables on the driveside of full suspension Ibis bikes.
Guide for routing cables on the non-driveside of full suspension Ibis bikes.
Specifics on cable routing for 1x drivetrains on full suspension bikes.
Guidance on routing cables at the front of full suspension bikes.
Detailed guide for rear derailleur cable routing on driveside.
Detailed guide for rear brake hose routing on non-driveside.
Specifics on routing brake cables on full suspension bikes.
Information on installing chain guides and chain length calculation.
Explanation of different cable routing port options available for Ibis bikes.
Specific method for routing front brakes on full suspension bikes.
Benefits and technology of Ibis wide carbon rims and wheels.
Recommendations for plus-size tire usage on Ibis bikes.
Guidelines for setting tire pressures on Ibis wide rims.
Specifications for the Carbon 19 rim and wheelset.
Specifications for the Carbon Logo rim and wheelset.
Specifications for the Aluminum Logo rim and wheelset.
Information on headset standards, dropouts, and brake mounts.
Recommendations for bottle cages on Ibis bikes.
Guidelines for carbon frame care, assembly compound, and paint.
How to set positive air spring pressure for optimal fork travel.
Adjusting low-speed, high-speed compression, and lockout for optimal performance.
Adjusting rebound for proper suspension recovery and feel.
Initial steps for setting sag, including air pressure and o-ring placement.
Sliding the o-ring up the stanchion after setting sag.
Measuring sag distance and initial adjustments.
Steps for setting sag using the standing method for Ripmo/HD5.
Balancing suspension, descent steepness, and common setup issues.
Adjusting compression and rebound settings after setting sag.
Tuning guide for Float 36 Factory GRIP 2 with compression and rebound settings.
Tuning guide for Float 34 Factory GRIP 2 with compression and rebound settings.
Tuning guide for Float 34 Performance GRIP.
Tuning guide for Float 34 Factory GRIP 2 with compression and rebound settings.
Setup guide for DVO Onyx forks including compression, rebound, and OTT adjustments.
Explanation of DVO's Off The Top (OTT) adjustment for initial suspension sensitivity.
Instructions for setting and checking rear shock sag for various Ibis models.
Information on the 3-position adjustment of Fox Float DPS shocks.
How to adjust the rebound damping on Fox Float DPS shocks.
Air pressure charts for DVO Jade X, Topaz, and Fox DPS shocks.
General advice on suspension settings differing from Fox recommendations.
How to adjust Fox Float X2 damper and base settings.
Part numbers and descriptions for aftermarket Fox forks and shocks.
DVO Topaz compression settings for various conditions and rider weights.
DVO Topaz compression settings for HD5.
DVO Topaz compression settings for Ripmo/Ripmo AF.
Recommended service intervals for suspension bushings.
Illustrated breakdown of frame hardware for the Ripmo.
Illustrated breakdown of frame hardware for the Ripmo AF.
Illustrated breakdown of frame hardware for the Ripley.
Illustrated breakdown of frame hardware for the HD5.
Illustrated breakdown of frame hardware for the Mojo.
Torque specs for full suspension bikes, Hakka MX, bushings, and rear axle.
Step-by-step guide for swingarm disassembly and reassembly.
Details of the 7-year frame and rim warranties.
Information on no-fault replacement and limited warranty terms.
Instructions for registration, serial number recording, and parts.
Recipe for homemade energy bars.
An illustration depicting the evolution of a bike component.
To Next Page
