ibis HAKKA MX User Manual

14 15

Driveside Cable Routing

Non-Driveside Cable Routing
NOTE: The Ripmo AF uses a cable port to exit the down tube, then you run uninterrupted cable to the
rear derailleur, from the front of the chainstay and exiting via the port at the end of the chainstay. NOTE: The Ripmo AF uses a hydro cable port to exit the down tube, then you run the brake line on top of the chainstay back to the caliper.
BUILD
BUILD
 

ibis HAKKA MX Specifications

General

Frame Material	Carbon Fiber
Wheel Size	700c
Brake Type	Disc
Max Chainring Size	50t
Seatpost Diameter	27.2mm
Drivetrain	1x or 2x
Tire Clearance	700c x 40mm
Fork	Enve Cross Disc Fork