Need help?Do you have a question about the ibis RIPMO AF and is the answer not in the manual?
General| Frame Material | Aluminum |
|---|---|
| Rear Travel | 147mm |
| Fork Travel | 160mm |
| Head Tube Angle | 64.9° |
| Chainstay Length | 435mm |
| Wheel Size | 29 inches |
| Rear Shock | DVO Topaz T3 Air |
| Drivetrain | SRAM NX Eagle |
| Brake Type | Disc |
| Seat Tube Angle | 76° |
| Weight | 32 lbs |
Welcome message and overview of the guide's scope and limitations.
Detailed geometric specifications and key features for various Ibis bike models.
Guidelines for selecting the correct frame size based on rider height.
Guidance on cable routing for full suspension bikes, including internal tube routing.
Details on Ibis wide rims, plus tires, and recommended pressure settings.
Information on headset standards, rear dropouts, and frame hardware components.
General guide to setting up your bike's front suspension for optimal performance.
Explanation of positive pressure, compression, lockout, and rebound adjustments.
Step-by-step guide for setting suspension sag on Ibis bikes using the o-ring method.
Procedure for balancing front and rear suspension for optimal traction and performance.
Troubleshooting common fork issues like stiffness or diving and their solutions.
Specific tuning guides for Fox 36 and Fox 34 forks based on bike models.
Tuning guide for Fox 34 fork compression and rebound adjusters for the Ripley.
Setup instructions and settings for DVO Onyx forks, including compression and rebound.
Setting sag, checking sag, and adjusting rebound for rear suspension shocks.
Information on the Fox Float DPS shock's 3-position adjustment and its modes.
Technical specifications for rear shocks and hardware on Ibis suspension bikes.
Critical steps for setting air pressure in the negative chamber for optimal shock performance.
Starting pressure charts for setting sag on DVO Jade X and Fox DPS rear shocks.
Starting pressure charts and settings for Fox X2 rear shocks on Ripmo/Ripmo AF.
Information on Fox aftermarket forks and shocks, including part numbers.
Starting pressure charts and settings for DVO Topaz rear shocks.
Guidelines for checking, cleaning, and replacing suspension bearings and bushings.
Diagrams showing frame hardware components for Ripmo and Ripmo AF models.
Diagrams showing frame hardware components for Ripley and HD5 models.
Diagrams showing frame hardware components for the Mojo model.
Recommended torque specifications and thread treatments for bike assembly.
Guidance on applying grease to bushings during reassembly for smooth operation.
Recommendation for tightening the Hexle rear axle with a multi-tool for on-ride convenience.
Step-by-step instructions for disassembling and reassembling the swingarm.
Details of Ibis frame, rim, and hub warranties, including coverage and limitations.
Policies on crash replacement parts, warranty exclusions, and general disclaimers.
Instructions for online warranty registration and contact info for service centers.
Recipe for homemade energy bars, including ingredients and nutritional information.
Contact details for Ibis Cycles, including phone, email, and mailing address.
To Next Page
