16 17
Brake Cable Routing
For the Ripmo, Ripmo AF, Ripley, Mojo HD5, and Mojo
we manufacture an optional, removable ISCG 05 mount
which mounts on the splines on the drive side of the
bottom bracket. Standard procedures apply to mounting
an ISCG 05 compatible chain guide or bash guard.
If you need an ISCG 05 adapter, it’s available
in our online store:
http://store.ibiscycles.com and search ISCG.
To determine the correct chain length: shift into the
large chainring and largest cog and let all the air out
of your shock (on suspension bikes only, duh).
Thread the chain through the gears and derailleurs,
compress the suspension all the way to bottom out,
and cut the chain at the minimum length needed with
the rear derailleur stretched out.
BUILD
BUILD
To Next Page
Loading...
Need help?
General
