5554
RIPLEY MODELS
HARDWARE TORQUE SPEC. THREAD TREATMENT
Clevis to Swingarm Bolts 8 Nm Loctite 243
Eccentric Shaft Bolts 8 Nm
Titanium Bolts: use Ti anti-seize on the shaft and Loctite 243 on the threads
Aluminum Bolts: use grease on the shaft and Loctite 243 on the threads
Lower Shock to Clevis Bolts 15 Nm Loctite 243
Upper and Lower Eccentric Core Bolts 8 Nm Loctite 243
Upper Shock Mount Bolts 4 Nm Ti anti-seize
MOJO 3
HARDWARE TORQUE SPEC. THREAD TREATMENT
Cable Port 2 Nm Grease
Clevis to Swingarm Bolts 8 Nm Loctite 243
Front Derailleur Cover Mount 5 Nm Loctite 243
Front Derailleur Mount 5 Nm Loctite 243
Lower Links 15 Nm Loctite 243
Lower Shock to Clevis Bolts 15 Nm Loctite 243
Rear Brake Caliper 6 Nm Loctite 243
Seat Binder 5 Nm Ti anti-seize
Upper Link Bolts 10 Nm Loctite 243
Upper Shock Mount Bolts 10 Nm Loctite 243
MOJO HD3
HARDWARE TORQUE SPEC. THREAD TREATMENT
Cable Port 2 Nm Grease
Clevis to Swingarm Bolts 15 Nm Loctite 243
Front Derailleur Cover Mount 5 Nm Loctite 243
Front Derailleur Mount 5 Nm Loctite 243
Lower Links 15 Nm Loctite 243
Lower Shock to Clevis Bolts 15 Nm Loctite 243
Rear Brake Caliper 6 Nm Loctite 243
Seat Binder 5 Nm Ti anti-seize
Upper Link Bolts 10 Nm Loctite 243
Upper Shock Mount Bolts 10 Nm Loctite 243
TRANNY29 / TRANS-FAT
HARDWARE TORQUE SPEC. THREAD TREATMENT
Cable Port 2 Nm Grease
Seat Stay Bolts 10 Nm Ti anti-seize
Slot Machine Bolt
(Geared Riding) 25-30 Nm Ti anti-seize
Slot Machine Bolt
(Single Speed Riding) 25-30 Nm Ti anti-seize
ALL MODELS
HARDWARE TORQUE SPEC. THREAD TREATMENT
Derailleur Hanger Bolt 5 Nm Grease
MOJO HD3 : FRAME HARDWARETORQUE SPECS
HEXLE REAR AXLE
There is not a numerical
torque gure for the Hexle.
We recommend tightening the
5mm with your multi tool that
you carry with you. This way
you’ll be able to remove it in
case of a at out on a ride.
MaINTaIN
MaINTaIN
To Next Page
Loading...
