11
Ripley Routing
Bike Set-Up Tips and Tricks
or FD casing with that 2nd tie over the
mid shock, as they don’t move with the
suspension. See illustration on page 9.
The FD cable should be run as directly
as possible and zip tied (loosely) to
the rear der. cable along the clevis.
See illustration on page 9.
derailleur cable should be routed on the
inside of the clevis. The second tie above
the middle of the shock should be used
on the rear derailleur and rear brake
only. It should be very tight too. It keeps
the casings from bowing out sideways
during suspension movement.
Don’t capture the dropper post cable
To Next Page
Loading...
