IBM 3852-2 - Page 53

1. Is
the Power
indicator light On?
NO
-- Continue
with thi step.
YES
-- Go
to
Step 3
on page 4-3.
Make
sure
your
printer
power cord
is
properly
connected.
a.
Make
sure any other
equipment
plugged
into
the
same wall
outlet will
operate.
5.
Make
sure
the printer
power cord
is
plugged
into
the back of the
printer.
c.
Make
sure
the
printer is completely
plugged into
a
wall socket.
d.
Make
sure
the
wall outlet
does not
turn
off with the room lights.
e.
Plug the printer into
a
different
wall
outlet.
f.
Exchange
the
power cord
with
your
workstation
power cord.
Capping
is necessary only
when
the printer
will
not
be
used for over
a
week, or
when
the
printer
is
being
transported.
You
do
not
have
to cap
the
ink
nozzles
after each time you
use
the
printer.
2. Make
sure
the printer is turned
On.
Did you
find any problem
while following
the
preceding
steps?
NO -- Have
your
printer serviced.
YES -- Correct
the problem and
try to
print again.
Cap
Capping
I-’
r ‘
I
I
•I
Lft4
lFflflr
4-9
Oneration
3-29