Device Drivers
10. Press the Ctrl+Alt+Del key sequence to restart the server.
The ServerGuide logo screen appears, followed by a
language-selection screen.
11. Select a language; the Main Menu appears.
12. Select Start Here and review the information.
The README files in the Start Here section of the ServerGuide
Main CD contain important information about ServerGuide,
operating systems, and device drivers. Be sure to review the
README files before you install your operating system.
Note: After using ServerGuide, verify that the date and time are
correct. Update these values if necessary.
Device Drivers
Device drivers are programs designed to support a specific type of
hardware device. They provide instructions that enable the
computer to interact with the device, or to take advantage of a
device's special feature. Not all devices require device drivers.
However, the RAID adapter and the PeerMaster adapter require the
installation of device drivers.
If you have a non-disk-array model, your IBM PC Server SCSI-2
Fast/Wide PCI Adapter Support Package contains device-driver files
that must be installed when you use OS/2, Novell NetWare,
Windows NT, and SCO UNIX. If you have a disk-array model,
your ServeRAID Device Driver/Administration and Monitoring
diskette contains device-driver files that must be installed when you
use OS/2, Novell NetWare, Windows NT, and SCO UNIX.
Note: See the README file in the IBM PC Server SCSI-2 Fast/Wide
PCI Adapter Support Package or on the Device
Driver/Administration and Monitoring diskette that comes
with your server for detailed instructions.
Chapter 2. Installing Software 31
To Next Page
Loading...
