35Operator’s Guide
Move the paper supports as
necessary to support the paper
through the tractor area.
Unlock the right tractor.
Load the paper onto the
sprockets and close the
tractor door.
If necessary, slide the right
tractor to remove paper
slack or to adjust for
various paper widths. Then,
lock the tractor.
After both tractors are
secured, you may use the
horizontal adjustment knob
to make fine horizontal
paper adjustments.
On pedestal models:
Guide the paper over the lower
paper guide and through the
slot in the top cover.
Press Form Feed several
times to make sure the paper
feeds properly beyond the
tractors and over the lower
paper guide. Feed sufficient
paper to ensure the paper
stacks correctly.
Horizontal
Adjustment Knob
Tractor Door
Tractor Lock
Paper Support
To Next Page
Loading...
