IBM 7014-T00 User Manual

2. Set the GlobalDelayTimer parameter with the object identier (OID) as shown in the following
illustration.
3. Set the IndividualDelayTimer parameter with the OID.
Using Telnet through the Ethernet port
Set the parameters for the power-on sequence function by using an Ethernet port and the Telnet
interface.
About this task
To set the parameters for the power-on sequence function by using an Ethernet port and the Telnet
interface, complete the following steps:
Procedure
1. Log in as ADMIN/1001.
2. Type 1 for System Conguration.
3. Type 3 for Outlet Global Delay Timer and PDU Location.
4. Type 15 to dene the Outlet Global Delay Timer.
5. Type the value for the New Outlet Global Delay Timer.
6. Type 0 to return to the previous menu.
7. Type 4 for the Outlet Name and Individual Delay Timer.
8. Type the outlet number and enter the outlet name and its IndividualDelayTimer value.
Using HyperTerminal through the serial port
Set the parameters for the power-on sequence function by using a serial port (HyperTerminal interface).
About this task
To set the parameters for the power-on sequence function by using a serial port (HyperTerminal
interface), complete the following steps:
Procedure
1. Make sure that the serial port conguration is 115200, 8-N-1-None.
2. Log-in as ADMIN/1001.
3. On the IBM PDU Conguration Utility main meu, type 8 to select Set PDU Location and Outlet
Information.
4. Ttype the GlobalDelayTimer value.
5. On the main menu, type the IndividualDelayTimer values for each outlet.
Using the web interface
Use the web interface to congure and monitor the PDU remotely. The PDU provides a graphical user
interface that you can view from a web browser. Using a web browser, you can access and monitor the
PDU power outlets and output devices remotely from a workstation or notebook computer.
Starting the web interface
To start the web interface, complete the following steps.
Procedure
1. Start a web browser from a workstation or notebook computer and enter the IP address of the PDU in
the address eld. The Login window opens.
2. In the User Name eld, type ADMIN (all uppercase letters). In the Password eld, type 1001.
3. Click Login. The main status page opens.
The main status page shows the PDU power outlets and input status per load segment:
Racks and rack features
75

IBM 7014-T00 Specifications

General

Brand	IBM
Model	7014-T00
Category	Racks & Stands
Language	English