IBM 8648 - eServer xSeries 226 User Manual

If you forget the administrator password, you can change the pin position of the
clear CMOS jumper on the system board to bypass the user and administrator
password check. This enables you to reset these passwords. See the Installation
Guide for the location of the clear CMOS jumper.
Using the ServerGuide Setup and Installation CD
The ServerGuide Setup and Installation CD includes an easy-to-use setup and
installation program that is designed for your IBM server. The ServerGuide program
detects the server model and hardware options that are installed and uses that
information during setup to configure the hardware. The ServerGuide program
simplifies operating-system installations by providing updated device drivers and, in
some cases, installing them automatically.
Note: The ServerGuide program works only with 32-bit Windows operating
systems.
If the ServerGuide program did not come with your server, or if a later version of
the ServerGuide program is available, you can download a free image of the
ServerGuide Setup and Installation CD, or you can purchase the CD. To download
the image, go to the IBM ServerGuide Web page at
http://www.ibm.com/pc/qtechinfo/MIGR-4ZKPPT.html. To purchase the latest
ServerGuide Setup and Installation CD, go to the ServerGuide fulfillment Web site
at http://www.ibm.com/pc/coupon/.
The ServerGuide program has the following features to make setup easier:
v An easy-to-use interface
v Diskette-free setup, and configuration programs that are based on detected
hardware
v ServeRAID Manager program, which configures the ServeRAID adapter and
updates the ServeRAID firmware if needed
v Device drivers that are provided for your server model and detected hardware
v Operating system partition size and file-system type that are selectable during
setup
ServerGuide features
Features and functions can vary slightly with different versions of the ServerGuide
program. To learn more about the version that you have, start the ServerGuide
Setup and Installation CD and view the online overview. Not all features are
supported on all server models.
The ServerGuide program requires a supported IBM server with an enabled
startable (bootable) CD-ROM drive. In addition to the ServerGuide Setup and
Installation CD, you must have your operating system CD to install your operating
system.
The ServerGuide program has the following features:
v Sets system date and time
v Detects the SCSI RAID adapter, controller, or integrated SCSI controller with
RAID capabilities and runs the SCSI RAID configuration program
v Checks the microcode (firmware) levels of a ServeRAID adapter and determines
whether a later level is available from the CD
v Detects installed hardware options and provides updated device drivers for most
adapters and devices.
18 xSeries 226 Type 8648: User’s Guide
|
|
|
|

IBM 8648 - eServer xSeries 226 Specifications

General

Brand	IBM
Model	8648 - eServer xSeries 226
Category	Server
Language	English