IBM Asia Pacific Hardware Announcement AG11-0027 IBM is a registered trademark of International Business Machines Corporation
2
Planned availability date
April 22, 2011
Description
With today's announcement, IBM offers the following Eaton-Powerware devices:
IBM 9910 Model E36 (Powerware 9910) is a 3000 VA, 230 to 240 V ac, single-phase
Uninterruptible Power System that helps protect equipment up to 2700 watts. This
line interactive device features load segments for scheduled shutdowns, extended
run times, and a 3U design to be rack-mounted. Under normal power conditions,
the E36 can operate in high-efficiency mode at up to 97 percent efficiency, thus
decreasing utility and cooling bills. The ability to add up to one extended battery
module (feature number 6651) extends battery run times. An AS/400/(i-OS) Relay-
Serial Card (optional) provides the standard communication to the server. The
Network Management Card (optional) expands control and monitoring of the power
system and network devices.
Powerware offers the Network Management Card (feature number 2945) to provide
enhanced monitoring capabilities with IBM Active Energy Manager for i5, iSeries, or
AS/400® and p5, pSeries, or RS/6000® rack clients with Microsoft® Windows®,
i5/OS®, AIX®, Linux®, or other operating system servers. The Relay-Serial Card
(feature number 2944) provides the relay contact interface commonly used with
servers with i-OS (AS/400).
Product number
Description Machine Model Feature
Powerware PW-9910I3kVA 230VXL3U Rack 9910 E36
Powerware PW-9910 3kVA Ext. Battery Mod. 9910 E36 6651
Powerware Relay-Serial Card 9910 E36 2944
Powerware Network Management Card 9910 E36 2945
Rack Cont. Specify: 9910/E36-3EIA 7014 T00, T42,
S25, B42 0393
Rack Cont. Specify: 9910/6651-3EIA 7014 T00, T42,
S25, B42 0394
The following 9910 UPS machine type, model, and feature numbers were
previously announced for pSeries and iSeries models:
Description Machine Model Feature
PDU to UPS Output Cord, UTG/Burndy to 9910 E35, E36 2974
IEC-320(C20)P 6ft.
Factory Install for rack UPS for pSeries 9910 E36 9010
Field Install for rack UPS for pSeries 9910 E36 9011
Factory Install for rack UPS for iSeries 9910 E36 9012
Field Install for rack UPS for iSeries 9910 E36 9013
IEC Input Power Cord (32A P+N+G, Type 46) 9910 E36 2976
for E36
Power Cord/Redundant Power Source
IBM Plug Type 54 14 ft. 9910 E36 9874
Power Cord/Redundant Power Source
IBM Plug Type 64 14 ft. 9910 E36 9875
To Next Page
Loading...
Need help?
General
