IBM BladeCenter Management Module - Page 16

v Netscape Navigator 4.72, or later (version 6.x is not supported)
v Mozilla version 1.3, or later
Notes:
1. For best results when using the Web browser, set the resolution on your monitor
to 800 x 600 pixels or higher and 256 colors.
2. The Web interface does not support the double-byte character set (DBCS)
languages.
The Web-based user interface communicates with the management-module Web
interface and management-module command-line interface, that are part of the
firmware that comes with the management module, to perform tasks such as:
v Defining the login IDs and passwords
v Selecting recipients for alert notification of specific events
v Monitoring the status of BladeCenter components
v Controlling BladeCenter components, including the blade servers
v Accessing the I/O modules to configure them
v Changing the drive startup sequence for a blade server
v Setting the date and time
v Using a remote console for the blade servers
v Changing ownership of the keyboard, video, and mouse
v Changing ownership of the CD-ROM drive, diskette drive, and USB port
v Activating On Demand blade servers
Note:
The IBM Director program is a system-management product that comes with
the BladeCenter unit. To configure the remote alert recipients for IBM
Director over LAN, the remote alert recipient must be an IBM
Director-enabled server.
You also can use the management-module Web interface and management-module
command-line interface to view some of the blade server configuration settings. See
Chapter 3, “Using the management-module Web interface,” on page 11 and the IBM
Eserver BladeCenter Management-Module Command-Line Interface Reference
Guide for more information.
6 BladeCenter Management Module: User’s Guide