IBM BladeCenter Management Module - Starting the Management-Module Web Interface

Table 1. User authority relationships (continued)
Window
Authority required to change information or execute tasks
Supervisor Blade Server Remote Console Access Blade Server Remote Console and Virtual Media Access Blade and I/O Module Power/Restart Access Ability to Clear Event Logs Basic Configuration (MM, I/O Modules, Blades) Network and Security Configuration Advanced Configuration (MM, I/O Modules, Blades) User Account Management
Blade Tasks
Power/Restart v v
On Demand v v
Remote Control
(remote console)
v v v
Remote Control
(virtual media)
v v
Firmware Update v v
Configuration v v v
Serial over LAN v v v
I/O Module
Tasks
Power/Restart v v
Management v v v
Firmware Update
v v
MM Control
General Settings v v v
Login Profiles v v v
Alerts v v v
Port Assignments v v v
Network Interfaces v v v
Network Protocols v v v
Security v v v
Configuration File v v
Firmware Update v v
Restore Defaults v v
Restart MM v v
Starting the management-module Web interface
Complete the following steps to start the management-module Web interface
program:
1. Open a Web browser. In the address or URL field, type the IP address or host
name assigned for the management-module remote connection (see
“Configuring the management module for remote access” on page 8 for more
details).
12 BladeCenter Management Module: User’s Guide