IBM BladeCenter Management Module - Page 38

For each user profile, specify the following values:
v Login ID
v Authority level (default is Read Only)
v Password (requires confirmation)
Several authority levels are available, each giving a user write and execute access
to different areas of management-module function. Multiple authority levels can be
assigned to each user. Users with Supervisor authority have write and execute
access to all management-module functions. Users with Read-Only authority can
access all management module functions for viewing only.
Attention: If you change the default login profile on your management module, be
sure to keep a record of your login ID and password in a safe place. If you forget
the management-module login ID and password, you must replace the management
module.
Click on View Configuration Summary to display the configuration settings for all
BladeCenter users and components.
28 BladeCenter Management Module: User’s Guide