IBM BladeCenter Management Module - Page 66

system-management functions that you will have to configure manually
after the restoration is complete. Some functions require configurations
on more than one window.
6. To proceed with restoring this file to the management module, click Restore
Configuration. A progress indicator appears as the firmware on the
management module is updated. A confirmation window opens to verify
whether the update was successful.
Note: The security settings on the Security page are not restored with the
restore operation. To modify security settings, see “Secure Web server
and secure LDAP” on page 42.
7. After receiving a confirmation that the restore process is complete, in the
navigation pane, click MM Control → Restart MM; then, click Restart.
8. Click OK to confirm that you want to restart your management module.
9. Click OK to close the current browser window.
10. To log in to the management module again, start your browser, and follow your
regular login process.
56 BladeCenter Management Module: User’s Guide