IBM DJSA-210 - Travelstar 10 GB Hard Drive - 13.7 Identify Device (ECh)

The execution time of this command is shown below.
about 8 minutesDJSA-205
about 16 minutesDJSA-210
about 30 minutesDJSA-220
about 42 minutesDJSA-230
about 39 minutesDJSA-232
13.7 Identify Device (ECh)
see belowStatus1 1 1 0 1 1 0 0Command
– – – – – – – –Device/Head1 – 1 D – – – –Device/Head
– – – – – – – –Cylinder High– – – – – – – –Cylinder High
– – – – – – – –Cylinder Low– – – – – – – –Cylinder Low
– – – – – – – –Sector Number– – – – – – – –Sector Number
– – – – – – – –Sector Count– – – – – – – –Sector Count
see belowError– – – – – – – –Feature
– – – – – – – –Data– – – – – – – –Data
7 6 5 4 3 2 1 0Register7 6 5 4 3 2 1 0Register
Command Block Input RegistersCommand Block Output Registers
V–0––0V000V00000
ERRIDXCORDRQDSCDFRDYBSYAMNT0NABT0IDN0UNCCRC
0123456701234567
Status RegisterError Register
Figure 78. Identify Device command (ECh)
The Identify Device command requests the device to transfer configuration information to the host. The
device will transfer a sector to the host containing the information in Figure 78 on pages 115–121.
Travelstar 32GH/30GT/20GN hard disk drive specifications
114