IBM eServer xSeries - xSeries 200 Internal Hard Disk Drive (HDD) and External Storage Configurator; 15,000 RPM Ultra160 SCSI HDD

13
Updated
28/02/01
xSeries 200 Internal Hard Disk Drive (HDD) and External Storage Configurator
Total
Internal
Storage
1
7200 RPM
Ultra160 SCSI
HDDs
10,000 RPM
Ultra160 SCSI
HDDs
15,000 RPM
Ultra160 SCSI
HDD
9.1 GB
(P/N 00N8204)
18.2 GB
(P/N 00N8205)
36.4 GB
(P/N 00N8206)
9.1 GB
(P/N 00N8207)
18.2 GB
(P/N 00N8208)
36.4 GB
(P/N 00N8209)
18.2 GB
(P/N 19K0658)
9.1GB
9.1GB Standard on
Base SCSI Models
(7200 rpm)
--
9.1GB Standard on
Base SCSI Models
(7200 rpm)
---
18.2GB 1 - - 1 - - -
27.3GB 2 or 1 - 2 or 1 or - 1
36.4GB 3 - - 3 - - -
45.5GB - 2 or 1 - 2 or 1 or 2
54.6GB 1 and 2 - 1 and 2 - -
or 54.6GB - - - 1 and - - 2
81.9GB - - 2 - - 2 -
91GB 1 and - 2 1 and - 2 -
100.1GB - 1 and 2 - 1 and 2 -
or 100.1GB - - - - - 2 and 1
145.6GB
(max)
2
- - 4
2
- - 4
2
-
This table does not represent all possible hard disk drive (HDD) configurations.
1. Select a total storage row then select the quantity of HDDs from a column corresponding to the HDD of choice. Total Internal Storage listed is within +
0.2 GB unless otherwise noted.
2. Maximum capacity assumes replacement of standard hard disk drives and tape drive (if installed) with the largest supported IBM hard disk drive.
Total
Internal
Storage
1
7200 RPM IDE HDDs
2
15 GB
(P/N 19K4460)
20.4 GB
(P/N 19K4461)
30 GB
(P/N 00N8203 )
15GB
15GB Standard on Base
EIDE Models
- -
30GB 1 - -
45GB 2
3
or - 1
55.8GB - 2
3
-
75GB - - 2
3
90GB (max)
4
--3
4
This table does not represent all possible hard drive configurations.
1. Select a total storage row and then select the quantity of HDDs from a column corresponding to the hard disk drive
of choice. Total Internal Storage listed is within +
0.2 GB unless otherwise noted.
2. The xSeries 200 EIDE controllers support a maximum of four IDE devices per machine including CD-ROM drive,
hard disks and IDE tape drive.
3. Not a supported configuration on model P/N K812Xxx which includes an IBM 10/20 GB TR5 Internal IDE Tape
Drive P/N 20L0549 as standard.
4. Maximum capacity assumes replacement of standard hard disk drives and tape drive (if installed) with the largest
supported IBM hard disk drive.
Bay Form Factor Heig
ht
Front
Access
Usage Part
Number
Description RPM Height Bays
Supported
Max.
Qty
1 133 mm (5.25”) HH yes IDE CD-ROM
IDE HDDs
1, 2
2 133 mm (5.25”) HH yes open
1, 2
19K4460 15GB 7200 rpm ATA/100 (EIDE) HDD 7200 SL 4...7 3
3
3 89 mm (3.5”) SL yes Diskette 19K4461 20.4GB 7200 rpm ATA/100 (EIDE) HDD 7200 SL 4...7 3
3
4 89mm (3.5”) SL yes open 00N8203 30GB 7200 rpm ATA/100 (EIDE) HDD 7200 SL 4...7 3
3
5...7 89mm (3.5”) SL yes open
Non Hot-Swap Ultra160 SCSI HDDs
2
00N8204 9.1GB 7200 rpm Ultra160 SCSI HDD 7200 SL 4...7 4
1. Bay 2 supports removable media devices only. Hard disk drives are not
supported.
2. 10/20GB TR5 Internal IDE Tape Drive P/N 20L0549 is standard in model
P/N K812Xxx.
00N8205 18.2GB 7200 rpm Ultra160 SCSI HDD 7200 SL 4...7 4
00N8206 36.4GB 7200 rpm Ultra160 SCSI HDD 7200 SL 4...7 4
00N8207 9.1GB 10,000 rpm Ultra160 SCSI HDD 10,000 SL 4...7 4
00N8208 18.2GB 10,000 rpm Ultra160 SCSI HDD 10,000 SL 4...7 4
00N8209 36.4GB 10,000 rpm Ultra160 SCSI HDD 10,000 SL 4...7 4
19K0658 18.2GB 15,000 rpm Ultra160 SCSI HDD 15,000 SL 4...7 4
External Storage Expansion Unit
4
Form Factor
19K11xx
7
EXP300 Storage Expansion Unit
5,6
Rack (3U)
09N7296 EXP300 Rack-to-Tower Conversion Kit -
94G7448 Rack Power Cable Type C12 (3.7m, 12 ft.)
6
-
Bay 4
CD-ROM
Bay 2
1
Diskette
Bay 5
Bay 6
Bay 7