IBM eServer xSeries User Manual

12
Updated
28/02/01
To access IBM information specific to your country via the World Wide Web, use address: http://www.ibm.com/pc
IBM xSeries 200
xSeries 200 At-A-Glance Chart
K811Xxx
-
667
1
1/1 128 64MB/1.5GB Tower 1/1 - 10/100 IDE 4/2 15/90GB
2,3
48X-20X 7/4 5/5
K812Xxx
4 -
667
1
1/1 128 64MB/1.5GB Tower 1/1 - 10/100 IDE 4/1 15/90GB
2,3
48X-20X 7/3
4
5/5
K813Xxx
-
667
1
1/1 128 128MB/1.5GB Tower 1/1 - 10/100 U160 4/2 9.1/145.6GB
2
48X-20X 7/4 5/4
K841Xxx
-
800
5
1/1 256 64MB/1.5GB Tower 1/1 - 10/100 IDE 4/2 15/90GB
2,3
48X-20X 7/4 5/5
K842Xxx
-
800
5
1/1 256 128MB/1.5GB Tower 1/1 - 10/100 U160 4/2 9.1/145.6GB
2
48X-20X 7/4 5/4
K851Xxx
-
866
5
1/1 256 64MB/1.5GB Tower 1/1 - 10/100 IDE 4/2 15/90GB
2,3
48X-20X 7/4 5/5
K852Xxx
-
866
5
1/1 256 128MB/1.5GB Tower 1/1 - 10/100 U160 4/2 9.1/145.6GB
2
48X-20X 7/4 5/4
1. Intel Celeron processor.
2. Maximum capacity assumes replacement of standard hard disk drives and tape drive (if installed), with the largest supported IBM hard disk drive.
3. Maximum capacity may be increased, by converting IDE models to support SCSI devices and replacing IDE devices with the largest supported hard disk drives. See Storage Configurator section.
4. This model is configured with an IBM 10/20GB TR5 Internal IDE Tape Drive P/N 20L0549 as standard.
5. Intel Pentium III processor with advanced transfer (full speed) L2 cache and 133 MHz front-side bus (FSB).
xSeries 200 Processor Upgrades
Part Number Processor Upgrades Description Processor Speed
Upgrade
1
21P9539 800 MHz Upgrade with 133 MHz FSB and 256 KB Advanced Transfer Cache Pentium III Processor All K81xXxx
10K3818 866 MHz Upgrade with 133 MHz FSB and 256 KB Advanced Transfer Cache Pentium III Processor All K81xXxx to K84xXxx
1.Requires removal of the standard processor. A maximum of one processor may be installed. Upgrades may require a BIOS update. To obtain the latest Flash BIOS, access www.ibm.com/
pc/support and enter machine type “Type-Model” in Quick Path. Select “Downloadable files” and then “BIOS”.
xSeries 200 Memory Configurator
Total System Memory
1
DIMMs
Standard
Model
with 64MB
Standard
Model
with 128MB
64 MB
P/N 33L3079
128 MB
P/N 33L3081
256 MB
P/N 33L3083
512 MB
P/N 33L3085
128 MB 192 MB 1 - - -
192 MB 256 MB 2 or 1 - -
320 MB 384 MB - 2 or 1 -
Part Number Memory Description
384 MB - - 3
2
--
33L3079 64MB 133MHz ECC SDRAM DIMM Memory
576 MB 640 MB - - 2 or 1
33L3081 128MB 133MHz ECC SDRAM DIMM Memory 768 MB 768 MB - - 3
2
-
33L3083 256MB 133MHz ECC SDRAM DIMM Memory
1088 MB 1152 MB - - - 2
33L3085
512MB 133MHz ECC SDRAM Unbuffered
DIMM Memory
1536 MB
(max)
2
1536 MB
(max)
2
---3
2
This table does not represent all possible memory configurations. Memory modules may vary in price per MB.
Selection of smaller DIMMs may provide a more cost-effective alternative to using larger DIMMs. Select the desired
total memory from the appropriate column (Standard Model 64MB or 128MB), then select a quantity in that row from
one of the DIMM columns.
1. Network Operating Systems may limit the maximum amount of addressable memory. See operating system
specifications for further information.
2. Requires removal of standard DIMMs.
DIMM Socket
DIMM Socket
DIMM Socket

IBM eServer xSeries Specifications

General

Brand	IBM
Model	eServer xSeries
Category	Server
Language	English