38
Updated
28/02/01
To access information on the World Wide Web, use address: http://www.ibm.com/pc
Series 240 / Netfinity 5600 Internal SCSI Cabling
The xSeries 240 and Netfinity 5600 contain a backplane supporting six hot-swap drive bays. The backplane is connected to the integrated dual channel, wide Ultra2 SCSI controller
connector through a 16-bit LVD SCSI cable. If internal RAID support is required, this cable can be used to connect to a supported RAID adapter rather than the integrated SCSI
controller. A two-drop, 16-bit SCSI cable with integrated terminator is also included with the server to support up to two internal removable media devices. This cable can be
attached to the integrated SCSI controller if a RAID adapter is used to support the internal hot-swap drive bays. It can also be used to attach to a supported SCSI adapter if the
integrated Ultra2 SCSI controller is utilised for the hot-swap bays. The second channel is available through an industry-standard 0.8-mm very high density connector interface
(VHDCI) located on the rear panel for external use.
Bay Form
Factor
Height Front
Access
Usage Part
Number
Description RPM Height Bays
Supported
Max.
Qty.
A
133 mm
(5.25”)
HH
1
Yes Open
Ultra160 Hard Disk Drives (HDD)
1
B
133 mm
(5.25”)
HH
1
Yes Open 37L7201 9.1 GB Ultra160 SCSI Hot-Swap HDD 7200 SL C...H 6
-
133 mm
(5.25”)
HH Yes
IDE CD-
ROM
37L7202 18.2 GB Ultra160 SCSI Hot-Swap HDD 7200 SL C...H 6
-
89 mm
(3.5”)
SL Yes Diskette 37L7203 36.4 GB Ultra160 SCSI Hot-Swap HDD 7200 SL C...H 6
C...H HS SL
2
Yes Open 37L7204
9.1 GB 10K-4 Ultra160 SCSI Hot-Swap
HDD
10,000 SL C...H 6
1. Two half-high (HH) bays can be combined to support a single full-high
(FH) device
2. Two slim-line (SL) bays can be combined to support a single half-high
(HH) device.
37L7205
18.2 GB 10K-4 Ultra160 SCSI Hot-Swap
HDD
10,000 SL C...H 6
37L7206
36.4 GB 10K-4 Ultra160 SCSI Hot-Swap
HDD
10,000 SL C...H 6
19K0655
9.1 GB 15K-rpm Ultra160 SCSI Hot-Swap
HDD
15000 SL C...H 6
19K0656
18.2 GB 15K-rpm Ultra160 SCSI Hot-
Swap HDD
15000 SL C...H 6
Associated Options
10K2340 Media Bay Tray and LVD Cable Kit
2
-- A+B 1
External Storage Expansion Units
3
Form Factor
19K11xx
9
EXP300 Storage Expansion Unit
4, 8
Rack (3U)
09N7296 EXP300 Rack-to-Tower Conversion Kit -
19K11xx
10
FAStT 200 Storage Server
5, 6, 8
Rack (3U)
19K11xx
11
FAStT 200 HA Storage Server
5, 8
Rack (3U)
19K1121 FAStT 200 Redundant RAID Controller
6
-
00N71xx
12
FAStT EXP500 Storage Expansion Unit
7, 8
Rack (3U)
94G7448 Rack Power Cable Type C12 (3.7m)
8
-
1. xSeries 240 / Netfinity 5600 contains an Ultra2 hot-swap backplane which limits Ultra160 HDDs to Ultra2 bus speeds.
2. Media Bay Tray and LVD Cable Kit P/N 10K2340 contains a two-drop terminated LVD SCSI cable and the hardware required
to convert two half-high 5.25” removable media bays into two non-hot-swap 7200rpm HDD bays.
3. Not supported by the onboard external SCSI port. To configure an external SCSI device, select an optional SCSI controller then
refer to see Appendix D: Cables-Storage Units-Controllers to confirm the controller supports the desired External Storage
Expansion Unit and to select a supported cable. For HDD or other expansion unit options, see the specific expansion unit section.
For Fibre Channel storage devices, refer to the Fibre Array Solutions section.
4. The EXP300 includes a single 2 M Ultra2 SCSI cable and dual hot-swap 500 W redundant power supplies, each with it’s own
standard country power cord. To convert an EXP300 to a tower form factor, Netfinity EXP300 Rack-to-Tower Conversion Kit
P/N 09N7296 is required.
5.The FAStT200 Storage Server and HA Storage Server each include two hot-swap, 350 W auto-ranging redundant power
supplies each with it’s own standard country power cord.
6. Can be upgraded to a FAStT200 HA Storage Server through the addition of a FAStT200 Redundant RAID Controller
P/N 19K1121.
7. The FAStT EXP500 Storage Expansion Unit P/N 00N71xx includes dual hot-swap 350 W power supplies, each with it’s own
standard country power cord.
8. These units do not include Rack Power Cables P/N 94G7448 when shipped (for attachment to high voltage UPS or PDU).
Standard country power cords only are included. If required, order Rack Power Cables (one for each power supply).
9.Where ‘xx’ represents a specific country code as follows: 51=US/English, 52=European/English, 56=Danish/English,
57=Israel/English, 58=Italian/English, 59=South Africa/English, 60=Swiss/English, 63=UK/English:- Line Cords/ Publication
Country Kits are included as indicated.
10. Where ‘xx’ represents a country specific code as follows:- 23=US/English, 24=Euro/English, 25=Euro/Spanish, 27=Euro/
German, 28=Denmark/English, 29=Israel/English, 30=Italy/English, 31=South Africa/English, 32=Switzerland/English,
34=Switzerland/German, 36=UK/English. Country/Language - Line Cords/Publications are included as indicated
11. Where ‘xx’ represents a country specific code as follows:- 37=US/English, 38=Euro/English, 39=Euro/Spanish, 41=Euro/
German, 42=Denmark/English, 43=Israel/English, 44=Italy/English, 45=South Africa/English, 46=Switzerland/English,
48=Switzerland/German, 50=UK/English. Country/Language - Line Cords/Publications are included as indicated.
12. Where ‘xx’ represents a country specific code as follows:- 36=US/English, 37=Euro/English, 41=Denmark/English,
42=Israel/English, 43=Italy/English, 44=South Africa/English, 45=Switzerland/English, 49=UK/English. Country/Language
Line Cords/Publications are included as indicated.
B
CD-ROM
Hot-Swap
(HS)
A
Removable Media (RM)
E
CF
G
H
D
A
B
CD-ROM
Diskette
Removable Media (RM)
Tower Model View
Rack Model View
For clarity purposes, bay labels in these
diagrams are for reference by the
accompanying tables and are not the
actual labels. Refer to the
documentation shipped with the system
for further details on actual labels.
C
D
E
F
G
H
To Next Page
Loading...
