IBM i Series User Manual

__ 10. Slide the power supply into the system unit.
__ 11. Move the handle down to lock in place.
__ 12. Push in the latch.
__ 13. Plug the power cord into the power supply and into the outlet.
__ 14. Install back cover.
__ 15. If you need to power on the system, follow the steps in “Power on the
system” on page 25.
Chapter 4. Replace power supply in iSeries 825 9

IBM i Series Specifications

General

Operating System	IBM i
Form Factor	Rack, Tower
Storage	SSD and HDD options
Security	compliance
Virtualization	IBM PowerVM
CPU	POWER processors
Scalability	Scale-up