__ c. Press the Increment/Decrement push button until B appears in the
Function/Data display.
__ d. Press the Enter push button on the control panel.
__ e. Press the Increment/Decrement push button until S appears in the
Function/Data display
__ f. Press the Enter push button on the control panel.
__ g. Press the Increment/Decrement push button until 01 appears in
the Function/Data display.
__ h. Press the Enter push button on the control panel.
01 B S should appear in the Function/Display panel. If it does
appear, not repeat steps 6a on page 25 through 6h.
__ i. Go to step 7.
7.
Press the Power push button that is located on the iSeries control panel. There
is approximately a 10-second delay before the power-on light comes on, and
data appears in the Function/Data display.
Note:
The system takes approximately 5 to 20 minutes to power on and
complete an IPL. When the IPL is complete, 01 B N S appears in the
Function/Data display.
26 5138, 5155, 5156, 5157 Power Supply and Air Moving Device V5R3
To Next Page
Loading...
Need help?
General
