IBM IntelliStation A Pro User Manual

Removing the bezel
When working with some devices, such as additional optical drives, you must first
remove the bezel to access the device.
Complete the following steps to remove the bezel:
1. Unlock the side-cover lock.
2. Remove the side cover (see “Removing the cover” on page 15).
3. Locate the bezel-release lever; then, press the bezel-release lever toward the
front of the computer.
1394
4. Pull the top of the bezel away from the chassis; then, push the bezel down to
disengage the bottom tabs.
5. Remove the bezel from the computer and store the bezel in a safe place.
For instructions for replacing the bezel, see “Replacing the bezel” on page 38.
Installing an adapter
The following notes describe the types of adapters that your computer supports and
other information that you must consider when installing an adapter. See
“System-board option connectors” on page 12 for an illustration of the adapter slot
locations.
v Read the documentation that comes with your operating system.
Chapter 2. Installing the hardware 17

IBM IntelliStation A Pro Specifications

General

Brand	IBM
Model	IntelliStation A Pro
Category	Desktop
Language	English