IBM IntelliStation A Pro User Manual

7. Locate the DIMM connectors. Determine the connectors into which you will
install the DIMMs. See the notes on page 31 for the installation sequence.
8. Gently open the retaining clip on each end of the DIMM connectors you have
selected.
9. Touch the static-protective package containing the DIMM to any unpainted
metal surface on the computer. Then, remove the new DIMM from the
package.
10. Turn the DIMM so that the contacts align correctly with the connector.
11. Insert the DIMM into the connector. Firmly press the DIMM straight down into
the connector by applying pressure on both ends of the DIMM simultaneously.
The retaining clips snap into the locked position when the DIMM is firmly
seated in the connector. If there is a gap between the DIMM and the retaining
clips, the DIMM has not been correctly installed. Open the retaining clips,
remove the DIMM, and then reinsert it.
DIMM
connector 1
DIMM
connector 2
DIMM
connector 3
DIMM
connector 4
12. Repeat steps 8 through 11 for the second DIMM in the pair.
13. If you moved the drive cage out of the way in step 5, push the drive cage
outward and press in on the drive-cage release tab. Rotate the cage part-way
into the computer, reconnect any power cables you disconnected from the
drives, and rotate the cage the rest of the way back into the computer.
14. If you have other options to install or remove, do so now. Otherwise, replace
the support bracket (see “Removing and installing the support bracket” on
page 16); then, go to “Completing the installation” on page 39.
Installing a second microprocessor
Your computer supports a second microprocessor, on its own microprocessor board,
with its own memory modules.
32 IntelliStation A Pro Type 6224: Installation Guide

IBM IntelliStation A Pro Specifications

General

Brand	IBM
Model	IntelliStation A Pro
Category	Desktop
Language	English