IBM iSeries 270 Hardware Problem Analysis And Isolation

v No: The Network interface card M41 you replaced in this step is the failing component.
This ends the procedure.
12.
Perform the following:
a. Power off the system.
b. Exchange the control panel in the system unit.
c. Power on the system.
Does the SRC 1xxx 840B appear on the panel?
v Yes: Continue with the next step.
v No: The control panel you replaced in this step is the failing component.
This ends the procedure.
13.
Perform the following:
a. Power off the system.
b. Exchange the SPCN card in the system unit. See symbolic FRU “TWRCARD” on page 470.
c. Power on the system.
Does
the SRC 1xxx 840B appear on the panel?
v Yes: Continue with the next step.
v No: The SPCN card you replaced in this step is the failing component.
This ends the procedure.
14.
Perform the following:
a. Power off the system.
b. Exchange the CEC backplane in the system unit.
c. Install all parts that were removed.
This ends the procedure.
15.
Perform the following:
a. Power off the system.
b. Install one of the units removed in step 10 (See page 489).
c. Power on the system.
Does
the SRC 1xxx 840B appear on the panel?
v No: Continue with the next step.
v Yes: The last unit you installed in this step is the failing component.
This ends the procedure.
16.
Have you installed all of the units removed in step 10 (See page 489).?
v Yes: This ends the procedure.
v No: Repeat step 15 (See page 490).
17.
Is the SRC 1xxx 840C?
v No: Continue with the next step.
v Yes: The memory module has been mis-plugged, reinstall the correct memory module and check
to see that it is seated correctly. If a problem still exists, exchange the Memory module. See
symbolic FRU “CCIN” on page 303 for the correct part.
This ends the procedure.
18.
Is the SRC 1xxx 8413?
v No: Continue with the next step.
v Yes: Exchange Processor 1 and the matching VPD card. See symbolic FRU “CCIN” on page 303
for the correct part.
This ends the procedure.
19.
Is the SRC 1xxx 8414?
490 iSeries: iSeries Server 270, 800, 810, 820, 825, 830, 840, 870, 890, SB2, and SB3 Hardware Problem Analysis and
Isolation

IBM iSeries 270 Specifications

General

Brand	IBM
Model	iSeries 270
Category	Server
Language	English