IBM iSeries 810 Analyze Hardware Problems (System Reference Codes

Reference Code Description/Action Perform all actions before exchanging Failing Items Failing Item
5120 System LIC detected a program exception
System LIC detected a programming problem. If performance or other
system degradation is occurring, the system may be operating with
reduced resources.
Check the Product activity log for related entries. If this reference code is
logged with a Class of Informational, then no action is required.
Otherwise, perform LIC-PIP1.
AJDG301
FI00130
5121 System LIC program exception occurred
System LIC detected a programming problem for which a main storage
dump may have been initiated.
A problem log entry may be generated for this ref code.
Perform LIC-PIP1.
AJDG301
5122 System LIC program exception occurred
System LIC detected an IOP programming problem for which an IOP
dump may have been initiated.
Perform LIC-PIP1.
FI00130
AJDG301
FI00131
5123 System LIC program exception occurred
System LIC detected an interface problem with the IOP or an IOP
programming problem for which an IOP and main storage dump may have
been initiated.
Perform LIC-PIP1.
FI00130
AJDG301
FI00131
5126 Addressed device failed to respond to selection DISKDRV
STORIOA
DISKTRY
FI01106
FI01140
FI01141
DEVTERM
BACKPLN
5127 IOP timed out a disk command DISKDRV
STORIOA
FI01106
DISKTRY
FI01140
FI01141
DEVTERM
BACKPLN
5128 I/O processor failure FI01112
FI01107
512D An IOP dump was initiated
Copy the IOP dump entry and any related entries from the Product
Activity Log to suitable media, and give to an IBM service representative.
B6xx (including A6xx)
272
iSeries: iSeries 270, 800, 810, 820, 825, 830, 840, 870, 890, SB2, and SB3 Analyze Hardware Problems (System Reference
Codes)

IBM iSeries 810 Specifications

General

Brand	IBM
Model	iSeries 810
Category	Server
Language	English