IBM iSeries 810 - Page 44

Reference Code Description/Action Perform all actions before exchanging Failing Items Failing Item
6C07 Disk Unit 8 regulator fault
A fault detection failure occurred for the regulator that powers disk unit 8
or F08. The regulator or the ac module/SPCN card can cause this fault.
DISKTRY
BKSPCN
6C08 Disk Unit K1 regulator fault
A fault detection failure occurred for the regulator that powers disk unit
K1, located in slot 1 of the disk expansion unit. The regulator or the ac
module/SPCN card can cause this fault.
DISKTRY
BKSPCN
6C09 Disk Unit K2 regulator fault
A fault detection failure occurred for the regulator that powers disk unit
K2, located in slot 2 of the disk expansion unit. The regulator or the ac
module/SPCN card can cause this fault.
DISKTRY
BKSPCN
6C0A Disk Unit K3 regulator fault
A fault detection failure occurred for the regulator that powers disk unit
K3, located in slot 3 of the disk expansion unit. The regulator or the ac
module/SPCN card can cause this fault.
DISKTRY
BKSPCN
6C0B Disk Unit K4 regulator fault
A fault detection failure occurred for the regulator that powers disk unit
K4, located in slot 4 of the disk expansion unit. The regulator or the ac
module/SPCN card can cause this fault.
DISKTRY
BKSPCN
6C0C Disk Unit K5 regulator fault
A fault detection failure occurred for the regulator that powers disk unit
K5, located in slot 5 of the disk expansion unit. The regulator or the ac
module/SPCN card can cause this fault.
DISKTRY
BKSPCN
6C0D Disk Unit K6 regulator fault
A fault detection failure occurred for the regulator that powers disk unit
K6, located in slot 6 of the disk expansion unit. The regulator or the ac
module/SPCN card can cause this fault.
DISKTRY
BKSPCN
6C0E Disk Unit K7 regulator fault
A fault detection failure occurred for the regulator that powers disk unit
K7, located in slot 7 of the disk expansion unit. The regulator or the ac
module/SPCN card can cause this fault.
DISKTRY
BKSPCN
6C0F Disk Unit K8 regulator fault
A fault detection failure occurred for the regulator that powers disk unit
K8, located in slot 8 of the disk expansion unit. The regulator or the ac
module/SPCN card can cause this fault.
DISKTRY
BKSPCN
6C10 Disk Unit K9 regulator fault
A fault detection failure occurred for the regulator that powers disk unit
K9, located in slot 9 of the disk expansion unit. The regulator or the ac
module/SPCN card can cause this fault.
DISKTRY
BKSPCN
6C11 Disk Unit K10 regulator fault
A fault detection failure occurred for the regulator that powers disk unit
K10, located in slot 10 of the disk expansion unit. The regulator or the ac
module/SPCN card can cause this fault.
DISKTRY
BKSPCN
1xxx
40
iSeries: iSeries 270, 800, 810, 820, 825, 830, 840, 870, 890, SB2, and SB3 Analyze Hardware Problems (System Reference Codes)