EasyManua.ls Logo

IBM iSeries 810 - Page 45

IBM iSeries 810
306 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Reference Code Description/Action Perform all actions before exchanging Failing Items Failing Item
6C12 Disk Unit K11 regulator fault
A fault detection failure occurred for the regulator that powers disk unit
K11, located in slot 11 of the disk expansion unit. The regulator or the ac
module/SPCN card can cause this fault.
DISKTRY
BKSPCN
6C13 Disk Unit K12 regulator fault
A fault detection failure occurred for the regulator that powers disk unit
K12, located in slot 12 of the disk expansion unit. The regulator or the ac
module/SPCN card can cause this fault.
DISKTRY
BKSPCN
6C14 Disk Unit K13 regulator fault
A fault detection failure occurred for the regulator that powers disk unit
K13, located in slot 13 of the disk expansion unit. The regulator or the ac
module can cause this fault.
DISKTRY
BKSPCN
6C15 Disk Unit K14 regulator fault
A fault detection failure occurred for the regulator that powers disk unit
K14, located in slot 14 of the disk expansion unit. The regulator or the ac
module can cause this fault.
DISKTRY
BKSPCN
6C16 Device 1 regulator fault
A fault detection failure occurred for the regulator that powers device 1 or
D01. The regulator or the ac module can cause this fault.
RMDEV
BKSPCN
6C17 Device 2 regulator fault
A fault detection failure occurred for the regulator that powers device 2 or
D02. The regulator or the ac module can cause this fault.
RMDEV
BKSPCN
6C18 Disk Unit 9 regulator fault
A fault detection failure occurred for the regulator that powers disk unit 9.
The regulator or the ac module can cause this fault.
DISKTRY
BKSPCN
6C19 Disk Unit 10 regulator fault
A fault detection failure occurred for the regulator that powers disk unit 10.
The regulator or the ac module can cause this fault.
DISKTRY
BKSPCN
6C1A Disk Unit 11 regulator fault
A fault detection failure occurred for the regulator that powers disk unit 11.
The regulator or the ac module can cause this fault.
DISKTRY
BKSPCN
6C1B Disk Unit 12 regulator fault
A fault detection failure occurred for the regulator that powers disk unit 12.
The regulator or the ac module can cause this fault.
DISKTRY
BKSPCN
6C1C Device 3 regulator fault
A fault detection failure occurred for the regulator that powers device 3.
The regulator or the ac module can cause this fault.
RMDEV
BKSPCN
6C1D Disk Unit K15 regulator fault
A fault detection failure occurred for the regulator that powers disk unit
K15, located in slot 15 of the disk expansion unit. The regulator or the ac
module can cause this fault.
DISKTRY
BKSPCN
1xxx
System Reference Codes 41

Table of Contents

Other manuals for IBM iSeries 810

Related product manuals