EasyManuals Logo
Home>IBM>Server>iSeries Series

IBM iSeries Series Analyze Hardware Problems (System Reference Codes

IBM iSeries Series
306 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #180 background imageLoading...
Page #180 background image
Reference Code Description/Action Perform all actions before exchanging Failing Items Failing Item
C333 Incompatible media was detected
Perform the following:
1. Verify that the disk has a format that is given support.
2. If the format is given support, clean the disk and attempt the failing
operation again.
3. If the operation fails again with the same reference code, ask your
media source for a replacement disk.
MEDIA
FI00870
C400 Interface error detected by device FI00870
FI01106
FI01112
FI01140
FI01141
DEVTERM
CDTRAY
C402 I/O processor internal program error occurred
Ask your next level of support for assistance.
FI00130
CFF2 Recovered from device not ready - Start Unit issued
The device successfully recovered from a temporary error.
No action is required. This reference code is logged for information only.
CFF4 Internal device error occurred FI00870
CFF6 Device recovered from error after retries
The device successfully recovered from a temporary error.
No action is required. This reference code is logged for information only.
CFF7 Recovered device error
The device successfully recovered from a temporary error.
No action is required. This reference code is logged for information only.
CFFE Recovered SCSI bus error
The device successfully recovered from a temporary error.
No action is required. This reference code is logged for information only.
FF09 Licensed Internal Code for optical device was not upgraded
This reference code is logged for information only.
FF3D Recovered I/O processor error
The device successfully recovered from a temporary error.
No action is required. This reference code is logged for information only.
FF6D Recovered System bus error
The device successfully recovered from a temporary error.
No action is required. This reference code is logged for information only.
Table 2. Optical Storage Unit Failing Items Details
632x, 6330, 6336
176
iSeries: iSeries 270, 800, 810, 820, 825, 830, 840, 870, 890, SB2, and SB3 Analyze Hardware Problems (System Reference
Codes)

Table of Contents

Other manuals for IBM iSeries Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the IBM iSeries Series and is the answer not in the manual?

IBM iSeries Series Specifications

General IconGeneral
BrandIBM
ModeliSeries Series
CategoryServer
LanguageEnglish

Related product manuals