IBM iSeries Series Analyze Hardware Problems (System Reference Codes

Reference Code Description/Action Perform all actions before exchanging Failing Items Failing Item
3130 A problem occurred during the IPL of a secondary partition
The partition ID is characters 3 and 4 of the B2xx reference code in word 1
of the SRC. If word 3 is zero, then this SRC is informational and can be
ignored.
Otherwise there is a problem in the Primary partition. A non-zero bus
number has no associated bus object.
Contact your next level of support.
LPARSUP
3135 A problem occurred during the IPL of a secondary partition
The partition ID is characters 3 and 4 of the B2xx reference code in word 1
of the SRC. An unknown bus type was detected.
FI00099
3140 A problem occurred during the IPL of a secondary partition
The partition ID is characters 3 and 4 of the B2xx reference code in word 1
of the SRC. The load-source IOP is not owned by the secondary partition.
This is a configuration problem in the secondary partition. Have the
customer re-configure the partition to have the intended load-source IOP.
If there is not a configuration problem then contact your next level of
support.
LPARSUP
3200 A problem occurred during the IPL of a secondary partition
The partition ID is characters 3 and 4 of the B2xx reference code in word 1
of the SRC. Read and understand the information about logical partitions.
See the iSeries Service Functions information.
Look for an SRC in the Service Action Log of the Primary partition logged
at the time the secondary partition was IPLing. Use the new SRC and go to
RCT.
FI00098
FI00096
4310 A problem occurred during the IPL of a secondary partition
The partition ID is characters 3 and 4 of the B2xx reference code in word 1
of the SRC. Read and understand the information about logical partitions.
See the iSeries Service Functions information.
Initiate a Primary partition main storage dump and contact your next level
of support.
FI00099
4311 A problem occurred during the IPL of a secondary partition
The partition ID is characters 3 and 4 of the B2xx reference code in word 1
of the SRC. Read and understand the information about logical partitions.
See the iSeries Service Functions information.
Initiate a primary partition main storage dump and contact your next level
of support.
FI00099
4312 A problem occurred during the IPL of a secondary partition
The partition ID is characters 3 and 4 of the B2xx reference code in word 1
of the SRC. Received an unexpected Direct Select Address.
Read and understand the information about logical partitions. See the
iSeries Service Functions information.
Initiate a Primary partition main storage dump and contact your next level
of support.
FI00099
B2xx
228
iSeries: iSeries 270, 800, 810, 820, 825, 830, 840, 870, 890, SB2, and SB3 Analyze Hardware Problems (System Reference
Codes)

IBM iSeries Series Specifications

General

Brand	IBM
Model	iSeries Series
Category	Server
Language	English