IBM iSeries Series Analyze Hardware Problems (System Reference Codes

Reference Code Description/Action Perform all actions before exchanging Failing Items Failing Item
4315 A problem occurred during the IPL of a secondary partition
The partition ID is characters 3 and 4 of the B2xx reference code in word 1
of the SRC. Storage in the Primary partition could not be allocated for the
LID manager. The IPL of the secondary partition is failed. Increase the
allocated storage to the Primary partition.
LPARCFG
4320 A problem occurred during the IPL of a secondary partition
The partition ID is characters 3 and 4 of the B2xx reference code in word 1
of the SRC. Configuration error. Expected a disk unit and got some other
kind of adapter or device.
See the iSeries Service Functions information.
LPARSUP
4321 A problem occurred during the IPL of a secondary partition
The partition ID is characters 3 and 4 of the B2xx reference code in word 1
of the SRC. Configuration error. Expected a tape or optical unit and
received some other kind of adapter or device.
See the iSeries Service Functions information.
LPARSUP
5106 Problem detected during main storage dump
The partition ID is characters 3 and 4 of the B2xx reference code in word 1
of the SRC. Not enough space in the Primary partition’s ASP to contain the
dump.
Contact your next level of support.
LPARSUP
5114 Problem detected during main storage dump
The partition ID is characters 3 and 4 of the B2xx reference code in word 1
of the SRC. There is not enough space on the secondary partition’s
load-source to contain the dump.
FI00099
5115 Problem detected during main storage dump
The partition ID is characters 3 and 4 of the B2xx reference code in word 1
of the SRC. There was an error reading the secondary partition’smain
storage dump from the secondary partition’s load-source into the Primary
partition’s main storage.
LPARSUP
5117 Problem detected during main storage dump
The partition ID is characters 3 and 4 of the B2xx reference code in word 1
of the SRC. A main storage dump has occurred but cannot be written to
the load source device because a valid dump already exists.
Contact your next level of support.
LPARSUP
5121, 5135, 5145 Problem detected during main storage dump
The partition ID is characters 3 and 4 of the B2xx reference code in word 1
of the SRC. There was an error writing the secondary partition’smain
storage dump to the secondary partition’s load-source.
LPARSUP
5148 Problem detected during main storage dump
The partition ID is characters 3 and 4 of the B2xx reference code in word 1
of the SRC. An error occurred while doing a main storage dump that
would have caused another main storage dump.
Contact your next level of support.
LPARSUP
B2xx
System Reference Codes 229

IBM iSeries Series Specifications

General

Brand	IBM
Model	iSeries Series
Category	Server
Language	English