IBM iSeries Series Analyze Hardware Problems (System Reference Codes

Reference Code Description/Action Perform all actions before exchanging Failing Items Failing Item
6012 A problem occurred during the IPL of a secondary partition
The partition ID is characters 3 and 4 of the B2xx reference code in word 1
of the SRC. The secondary partition’s LID failed to completely load into the
the partition’s mainstore area.
Contact your next level of support.
LPARSUP
6015 A problem occurred during the IPL of a secondary partition
The partition ID is characters 3 and 4 of the B2xx reference code in word 1
of the SRC. Read and understand the information about logical partitions.
See the iSeries Service Functions information.
The load-source media is corrupted or invalid. A SLIP install of the
secondary partition is required to recover.
MEDIA
FI00099
6025 A problem occurred during the IPL of a secondary partition
The partition ID is characters 3 and 4 of the B2xx reference code in word 1
of the SRC. The partition ID is characters 3 and 4 of the B2xx reference
code in word 1 of the SRC. Read and understand the information about
logical partitions. See the iSeries Service Functions information.
This is a problem with the load-source media being corrupt or invalid. A
SLIP install of the secondary partition is required to recover.
MEDIA
FI00099
6027 A problem occurred during the IPL of a secondary partition
The partition ID is characters 3 and 4 of the B2xx reference code in word 1
of the SRC. Read and understand the information about logical partitions.
See the iSeries Service Functions information.
A failure occurred when allocating memory for an internal object used for
LID load operations.
LPARCFG
6110 A problem occurred during the IPL of a secondary partition
The partition ID is characters 3 and 4 of the B2xx reference code in word 1
of the SRC. Error on load-source device.
See the information about logical partitions. See the iSeries Service Functions
information.
Record the SRC. The Direct Select Address of the device IOP in the SRC.
Word 3: Bus, Word 4: Board, Word 5: Card.
FI00098
6900 A problem occurred during the IPL of a secondary partition
The partition ID is characters 3 and 4 of the B2xx reference code in word 1
of the SRC. The guest partition’s allocated memory is not large enough for
the kernel specified to load. Increase the size of the secondary partition’s
memory allocation. Word 3 of the SRC is the allocated size of the
secondary partition and word 4 of the SRC is the required size of the
kernel.
LPARCFG
B2xx
230
iSeries: iSeries 270, 800, 810, 820, 825, 830, 840, 870, 890, SB2, and SB3 Analyze Hardware Problems (System Reference
Codes)

IBM iSeries Series Specifications

General

Brand	IBM
Model	iSeries Series
Category	Server
Language	English