IBM Power System S814 User Manual

3. Lift the blue release latches (1) on the slide rails and push the server (2) all the way into the rack until
it clicks into place. For details, see Figure 8.
Installing the cable-management arm
The cable-management arm is used to efficiently route cables so that you have proper access to the rear
of the system. Use the procedure to install the cable-management arm.
To install the cable-management arm, complete the following steps:
1. Ensure that you have the following parts.
Item Description
▌A▐ Support arm
▌B▐ Cable-management stop bracket
▌C▐ Mounting bracket
▌D▐ Cable-management arm
▌E▐ Extension bracket
1
3
4
2
5
P8EG1602-0
Figure 7. Extending slide rails and aligning server nail heads with the slots on the rail
2
P8EG1601-0
1
Figure 8. Release latches and server
Installing the IBM Power System S814 (8286-41A) 7

IBM Power System S814 Specifications

General

Brand	IBM
Model	Power System S814
Category	Server
Language	English