Figure 107. Installing or replacing a PCIe adapter in the 9009-41A stand-alone system.
e) Using your labels, reconnect all cables and transceivers that are attached to the adapter.
f) Repeat steps “21.a” on page 106 through “21.e” on page 108 for the remaining adapters.
22. For a rack-mounted system, replace the air baffle (A) straight down into the chassis as shown in
Figure 108 on page 109.
For a stand-alone system, replace the air baffle (A) straight into the side of the chassis as shown in
Figure 109 on page 110.
Ensure that the front flap tucks under the front chassis.
108
Power Systems: System backplane
To Next Page
Loading...
