IBM RS/6000 7014-S00

Installation Overview
Step 7:
Connect the Drawer
and Device Cables
Start
Step 3:
Attach the Stabilizer
and Door Guide
Step 4B:
Attach the Rack
through a Raised Floor
Step 4A:
Attach the Rack
to a Concrete Floor
Step 2:
Level the Rack
Step 1:
Position the Rack
Step 6.1:
Connect the
Power
Distribution Panel
Step 6.4:
Connect the Power
Distribution Bus
Step 6.2:
Connect the
Circuit Breaker
Panels
Step 5 (Optional):
Attach the Convenience
Outlet Mounting Plates
Will the rack be
bolted down to
the floor?
Will the rack
be bolted down
through a raised
floor?
Will the rack
accept low
voltage (-48 V
DC) power?
Does the rack
have a Power
Distribution
Panel?
Step 6.3:
Check the
Customer's AC
Outlets
End
No
No
No
No
Yes
Yes
Yes
Yes
Step 8:
Power-on and
Checkout
2-2 7014 Model S00 Rack Installation and Service Guide