Chapter 3. Service Inspection Guide
Perform a service inspection on the system when the following conditions occur:
The system is inspected under a maintenance agreement.
Service is requested and service has not recently been performed.
An alterations-and-attachments review is performed.
Changes have been made to the equipment that might affect the safe operation
of the equipment.
External devices with an attached power cord are connected to the system unit.
If the inspection indicates an unacceptable safety condition, the condition must be
corrected before representatives service the machine.
Note: The correction of any unsafe condition is the responsibility of the owner of the
system.
Chapter 3. Service Inspection Guide 3-1
To Next Page
Loading...
