Replacement
Attention: This system does not support channel memory, such as memory
expansion adapters.
Note: New memory modules must be installed in the first available vacant
connector, starting at A and progressing to H. The only exception is the
128MB memory module which cannot be installed in connector A due to
space limitations.
1. The memory modules are keyed so that they can only be inserted one way.
Align the memory module notches with the keys in the memory connectors.
2. Insert the memory module into the next unused memory connector. Push down
on the memory module until the latch tabs lock the memory module into the
connector. (Do not attempt to move the latch tabs yourself. They lock
automatically when you have fully inserted the memory module.)
7-20 Service Guide
To Next Page
Loading...
