Attention: Inserting the memory module diagonally may damage the memory
module.
3. If you have no more removal and replacement procedures to perform, replace
the airflow baffle:
a. Insert the airflow baffle toward the front of the system unit.
b. Slide the airflow baffle toward the rear of the system unit, being careful not to
disturb already-installed memory modules.
c. Insert and tighten the three screws that secure the airflow baffle to the
system unit chassis.
4. Replace the system unit covers.
Chapter 7. Removal and Replacement Procedures 7-21
To Next Page
Loading...
